Audiovox Car Security System APS 996a Spezifikationen PDF herunterladen (Seite 3)

General Description

The JNS WIFI TOP

™

consists of precision timers and relays that simulate the

operation of the rocker switches for the top and tonneau. In the standby mode

the Interface is monitoring the trigger outputs of the car alarm system. When an

extra channel of the car alarm system is accessed by the remote control the

system wakes up and powers the Hardtop ECU. Depending on the channel

selected, the hardtop or tonneau is opened or closed according to preset timing.

Hardtop closure is timed to the safety stop and automatically actuated a second

time to complete the closure.

Power to the system is applied for a limited time to prevent battery drain. If

additional triggers are detected during system power up, the system will operate

the appropriate function until the system timer expires. If the trigger detected is

for the opposite function, the unit will reverse operations subject to the system

timer. If the system timer times out while the hardtop or tonneau is being

actuated the next trigger received will start a new system timer and allow

completion of operations.

Functional Block Diagram

Figure 1 - WIFI TOP

™

Block Diagram

JNS Engineering 3 3/28/2009

1 2 3 4 5 6 7 8 ... 30 31

Keine Kommentare

Audiovox Car Security System APS 996a Spezifikationen Seite 3