Audiovox PRO9644A Installationshandbuch PDF herunterladen (Seite 8)

128-8700b

8 of 16

Page 8

WARNING: Connecting the light blue/green to the high current switched output of trunk release

circuits, some remote start trigger inputs, will damage the control module.

Connect the light blue/green to terminal 86 of a 30 A automotive relay, connect terminal 85

to a + 12 volt source, and wire the remaining relay contacts to perform the selected

function of channel 5.

2 Pin White Connector: DASH MOUNTED LED.

Route the red and blue wires in the 2 pin white connector from the LED to the control module, and plug it

into the mating white connector on the side of the module.

2 Pin Blue Connector: PUSH BUTTON VALET SWITCH

Route the black and gray wires in the two pin blue connector from the pushbutton valet switch to the control

module and plug it into the mating connector on the side of the module.

4 Pin White Connector: SHOCK SENSOR PART # 1122591

Route the red, black, blue, and green wires in the 4 pin white connector from the shock sensor to the control

module, and plug one end into the shock sensor, and the other end into the mating white connector on the

side of the module.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Audiovox PRO9644A Installationshandbuch Seite 8