Audiovox PRO9801 Bedienungshandbuch PDF herunterladen

128-8794

1 of 24

Page 1

Model PRO9801C

Owner’s Manual

IMPORTANT ! In order to provide you with the highest level of security to your

vehicle, this system is equipped with selectable manual override circuitry. It is

possible that you will need to override your security system if the transmitter

becomes lost, or inoperative due to battery failure. Reading the sections on

"Manually Overriding Your System" is necessary to fully understand the

procedure required to enable your vehicle in such situations. In addition, the

chart on page 23 of this manual has a section for the particular features and

functions installed in your vehicle as well as the override method selected.

Although the default mode is "Valet Switch" operation, the system can be

configured for "Custom Code" operation for enhanced security. Confirm the

override mode selected on page 23 of this manual, and familiarize

yourself with the section on its operation.

FEATURES :

 1 Two Way 5 Button Remote Control And 1 One Way 5 Button Remote Control

 Six Channel Code Learning Programmable Receiver

 External Superheterodyne Transceiver Antenna w/PushButton Switch & LED

 Single Or Two User Programmable W/Separate Control Outputs

 Single Button Lock/Unlock or Separate Button Lock/Unlock or Both

 Remote Keyless Entry With Optional Access Guard (must have power door

locks)

 Selectable Manual Override Mode

 New Enhanced Panic Feature (Any button other than unlock stops siren, no

change to the units state)

 Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit )

 Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect

Off, City Mode)

 Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or

For Remote Start)

 24 Hour Time Start Mode

 Cold Temperature Start Mode

 2 or 4 Hour Automatic Start Mode

 Parking Meter Count Down Timer On LCD Remote

 Additional Count Down Timer Mode

 Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds

To Engage)

 Improved Custom Code Override, User Selectable and Programmable

5 Button Remote Start Security System With

Plug-In Shock Sensor & Starter Disable

1 2 3 4 5 6 ... 23 24

Inhaltsverzeichnis

Seite 1 - Model PRO9801C

128-87941 of 24Page 1Model PRO9801COwner’s ManualIMPORTANT ! In order to provide you with the highest level of security to yourvehicle, this system

Seite 2

128-879410 of 24Page 10To change or adjust the shock sensor, press and release the ARM button of yourkeychain transmitter.1. Within 2 seconds of armin

Seite 3

128-879411 of 24Page 11lights will flash or turn on depending on the programming set up by yourinstallation center.When you arrive at your vehicle, di

Seite 4

128-879412 of 24Page 12The parking lights will flash and the siren will chirp 4 times indicating the timedstart mode is activated.CANCELING THE AUTOMA

Seite 5

128-879413 of 24Page 13ADDITIONAL REMOTE FUNCTION (CHANNEL 6 )Channel 6 is an alternate output that can be controlled by the unlock button of thetran

Seite 6

128-879414 of 24Page 142. Set the parking, (hand), brake.3. Be certain your foot is off the brake pedal.4. Press the receiver's program/Push-Butt

Seite 7

128-879415 of 24Page 15NOTE: The engine can be started in many modesarmed, disarmed, valet, etc... The screen shown isLocked/Armed and running.When th

Seite 8

128-879416 of 24Page 16ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:If the arm/disarm chirp tones have been turned off at thevehicle, when you arm, or d

Seite 9

128-879417 of 24Page 17ADDITIONAL REMOTE FEATURES:The two way remote control unit allows you to access statusinformation from the vehicle, check tempe

Seite 10 - 10 of 24

128-879418 of 24Page 18Note this feature must be activated at the vehicle at the prescribed time. Onceactivated at the vehicle, you can toggle the fea

Seite 11 - 11 of 24

128-879419 of 24Page 19Battery Indicator: Your transmitter has a battery indicator that isshown in the upper right corner of the screen as shown left.

Seite 12 - 12 of 24

128-87942 of 24Page 2 Protected Push Button LED Valet/Override Switch In Windshield Receiver 7-Function LED-Arm / Disarm / Zone 1 / Zone 2 / Zone 3

Seite 13 - 13 of 24

128-879420 of 24Page 20Temperature Start Mode. This icon will appear when the temp startmode is activated. The vehicle will start one time automatical

Seite 14 - 14 of 24

128-879421 of 24Page 21

Seite 15 - 15 of 24

128-879422 of 24Page 22THIS PAGE LEFT BLANK INTENTIONALLY

Seite 16 - 16 of 24

128-879423 of 24Page 23PRO9801CSYSTEM FUNCTIONS AT A GLANCEDASH LED INDICATORSRAPID FLASHING = PASSIVE ARMING/ACTIVEREARMINGSLOW FLASHING = ARMEDOFF =

Seite 17 - 17 of 24

Seite 18 - 18 of 24

128-87943 of 24Page 3known as a code grabber, which will receive and store the signal from yourkeychain transmitter and re-transmit at a later time to

Seite 19 - 19 of 24

128-87944 of 24Page 4 The dash mounted LED begins to flash slowly. Parking Lights flash one time. Siren will not sound.If the siren "chirped&q

Seite 20 - 20 of 24

128-87945 of 24Page 5 Any mild impact to the vehicle’s glass will cause the alarm to sound a shortseries of warning tones. Any strong impact to the

Seite 21 - 21 of 24

128-87946 of 24Page 6 Parking Lights flash two times.If the parking lights flashed three times, then the alarm was triggered in yourabsence. Before t

Seite 22 - 22 of 24

128-87947 of 24Page 73. To return to normal operation, press and release the Push-Button switch any time theignition is on.NOTE: Always remember to re

Seite 23 - 23 of 24

128-87948 of 24Page 82. Turn the ignition switch to the on position.3. Within 10 seconds, press and release the Receivers Push-button switch, 3 times.

Seite 24 - 24 of 24

128-87949 of 24Page 9NOTE: Your system must be programmed by the installation center toenable this feature.REMOTE PANIC OPERATIONThe Lock or Unlock bu