Audiovox PRO9644A Installationshandbuch PDF herunterladen (Seite 15)

128-8700b

15 of 16

Page 15

SELECTABLE FEATURES

Programmable Features :

Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps Default

1st Door L/UL 1 Sec. 3.5 Sec. 1 S L, Dbl.U/L 350mS UL/1SL 1 Sec.

2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off

3rd Accy. UL Auto UL Dr Auto UL All Auto UL Off Auto UL Off

4th Headlights On Arm On Disarm On Both Off Both

5th Passive Locks Passive Active Active

6th Passive/Active Arm Passive Arm Active Arm Active Arm

7th Voltage Sense Voltage Sense Hardwire Hardwire

8th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn

9th Horn Chirp 10mS 16mS 30mS 40mS 50mS 16mS

10th Override Method Custom Code Valet Valet

11th Two Step Unlock On Off Off

12th Chirp Delete From Tx On Off Of f

PROGRAMMING BANK 1 (TRANSMITTERS):

1. Turn the ignition key to the on position.

2. Press and release the valet/programming switch 3 times (Siren Chirps).

3. Press the Lock Button of each transmitter you want programmed until you hear a chirp from the horn or siren.

4. Turn the ignition switch off.

The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons of the system. For additional

channel programming see the owners guide found within the literature bag packaged with this kit.

PROGRAMMING BANK 2 (ALARM FEATURES):

You can enter bank 2 from bank 1 by turning the ignition key off then on from step 4 of Bank 1.

(Siren Short then Long Chirp), or You can also go right to bank 2 by:

1. Turn the ignition key to the on position.

2. Press and release the valet/programming switch 3 times (Siren Chirps).

3. Turn the ignition key off then on. (Siren Short Then long Chirp)

4. Press the pushbutton switch once to advance to feature 1, twice to advance to feature 2, etc, then use the lock

button of the transmitter to select the feature setting.

Example to set passive arming:

1. Turn the ignition key to the on position.

2. Press and release the valet/programming switch 3 times (Siren Chirps).

3. Turn the ignition key off then on. (Siren Short Then long Chirp)

4. Press the pushbutton switch six times to advance to features 6, Pass/Act Arm, then use the lock button of the

transmitter to select two chirps "Passive Arm".

5. To exit the programming mode, turn the ignition key off. The program mode is automatically exited when

there is no activity on the pushbutton switch or the transmitter lock button.

Audiovox PRO9644A Installationshandbuch Seite 15