Audiovox PRO 9644aUGH Bedienungsanleitung PDF herunterladen (Seite 1)

128-6629

1 of 8

Model PRO 9246CH

Installation Manual

PRE-INSTALLATION NOTES:

RF Programmable Features :

Feature Selection 1 Flash 2 Flash 3 Flash Default

1st Door L/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L 1 Sec.

2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off

3rd Accy. UL Drivers Door All Doors Off Auto UL Off

4th Passive Locks Passive Active Active

5th Passive/Active Arm Passive Arm Active Arm Active Arm

6th Horn Chirp Duration 10 mS 16 mS 30 mS 16 mS

6th Override Method Custom Code Valet Valet

To program these selectable features;

Action System Response

Turn ignition on No response

Press and release the valet switch 3 times 1 Flash - LED 1 flash

Within 3 seconds, turn ignition Off

First Then On 1 Flash = 1 second door locks

Press transmitter Lock button to change 2 Flash = 3.5 second door locks

Press transmitter Lock button to change 3 Flash = 1 sec. lock, dbl 1 sec. unlock

Second Press and release the valet switch 2 Flash = auto locks off

Press transmitter Lock button to change 1 Flash = auto locks on

Third Press and release the valet switch 3 Flash = auto unlock off

Press transmitter Lock button to change 1 Flash = drivers door only

Press transmitter Lock button to change 2 Flash = all doors unlock

Fourth Press and release the valet switch 2 Flash = active locks

Press transmitter Lock button to change 1 Flash = passive locks

Fifth Press and release the valet switch 2 Flash = active arming

Press transmitter Lock button to change 1 Flash = passive arming

Sixth Press and release the valet switch 2 Flash = 16 mS horn output

Press transmitter Lock button to change 3 Flash = 30 mS horn output

Press transmitter Lock button to change 1 Flash = 10 mS horn output

Seventh Press and release the valet switch 2 Flash = valet switch override operation

Press transmitter Lock button to change 1 Flash = custom code override operation

Press and release the valet switch Exit program mode

Turn ignition key off Exit program mode

Note: Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the

programming will be terminated.

1 2 3 4 5 6 7 8

Model PRO 9246CH 1
128-6629 2

Inhaltsverzeichnis

Seite 1 - Model PRO 9246CH

128-66291 of 8Model PRO 9246CHInstallation ManualPRE-INSTALLATION NOTES:RF Programmable Features :Feature Selection 1 Flash 2 Flash 3 Flash Default1st

Seite 2 - 128-6629

128-66292 of 8-2-Pre-Installation Notes:Receiver Channels and Functions:Channel 1 is the Lock and Programming select channel of the receiver. This wil

Seite 3

128-66293 of 8-3-Mounting Of The Components:Control Module:Select a mounting location inside the passenger compartment (up behind the dash), and secur

Seite 4

128-66294 of 8-4-2 Dark Blue Wires: Pulsed Output (Channel 3, Trunk Release)The dark blue wires are controlled via an independent RF channel from the

Seite 5

128-66295 of 8-5-to preform the specified function.Green/White Wire: COMMON contact of an on-board, 10 A maximum, relay.Connect the green/white wire

Seite 6

128-66296 of 83 Wire Ground Switched 2 Step Door LocksIn this application, the Dark Green is not used, the Yellow wire connects to chassis ground, and

Seite 7

128-66297 of 8-7-

Seite 8