Audiovox VSIR100W/B Bedienungsanleitung PDF herunterladen

Remote-Controllable

Infrared Stereo Volume Control

– VSIR100W/B

Control volume of multiple sources remotely.

Features and characteristics-

• Infrared stereo volume control with selectable impedance matching (1x, 2x,

4x, 8x).

• Includes Decora™ insert and decorative faceplates in white or ivory.

• Power handling: 25 ~ 100 watts per channel RMS.

• Removable connectors accommodate 14- to 22-gauge wire.

• One- or two-side terminal connections.

Instruction

1. Remove about 1/4” of insulation from both ends of all wires to be connected

to the volume control. Twist the exposed strands.

Note: The removable connectors accept up to 14 gauge wire.

2. Loosen the set screws on the volume control.

3. Connect the leads from your amplifier to the volume control set screws

labeled INPUT. Make sure the LEFT L(+) and L(-) and RIGHT R(+) and R (-)

wires are inserted in the appropriately marked opening. Then, tighten the

screws.

4. Connect your speaker wires to the volume control set screws labeled

OUTPUT, observing the + (positive) and - (negative) polarity of left and right

speaker.

5. Set up the completed assembly in the junction box. Insert the assembly

carefully to avoid excessive strain on the set screws. If necessary,

pre-dress the wires.

6. Set up to receive IR: Loosen the connector screws. Insert the

corresponding wires. Then, tighten the screws.

- “ V+”

- 12VDC power

- “ G ”

- Grounding

- “IR ” - IR signal

7. Mount the VSIR100 into wall box and screw on the face plate.

Volume set at maximum

Impedance jumper settings to match 8



at amplifier

SPEAKER OHMS () 1X 2X 4X 8X

8 1 PAIR 2 PAIR 4 PAIR 8 PAIR

4 - 1 PAIR 2 PAIR 4 PAIR

Impedance jumper settings to match 4



at amplifier

SPEAKER OHMS () 1X 2X 4X 8X

8 2 PAIR 4 PAIR 8 PAIR 16 PAIR

4 1 PAIR 2 PAIR 4 PAIR 8 PAIR

Jumper settings Assembly diagram

Mounting depth: 2.48” (63mm) from finished wall.

1 2

– VSIR100W/B 1
Carmel, IN 46032 2

Inhaltsverzeichnis

Seite 1 - – VSIR100W/B

Remote-Controllable Infrared Stereo Volume Control – VSIR100W/B Control volume of multiple sources remotely. Features and characteristics- • Infrare

Seite 2 - Carmel, IN 46032

Connection diagram AUDIO SOURCEINPUTINPUTOUTPUTOUTPUTL+L-R+R-LEFT SPEAKERRIGHT SPEAKERSelf-adhesive10 feet wire12V 500mA InfraredTransparent

Kommentare zu diesen Handbüchern

Keine Kommentare

Audiovox VSIR100W/B Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Komponenten von Sicherheitsgeräten Audiovox VSIR100W/B herunter. Audiovox VSIR100W/B User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern