Audiovox PRO-9642CH Bedienungsanleitung PDF herunterladen

128-6623

1 of 8

Model PRO-9642CH

Installation Manual

Note : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin switch in order to

begin the passive arming sequence.

RF Programmable Features :

Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps Default

1st Door L/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L 1 Sec.

2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off

3rd Accy. UL Auto UL Dr. Auto UL All Auto UL Off Auto UL Off

4th Passive Locks Passive Active Active

5th Passive/Active Arm Passive Arm Active Arm Active Arm

6th Voltage Sense Voltage Sense Hardwire Hardwire

7th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn

8th Horn Chirp 10mS 16mS 30mS 16mS

9th Override Method Custom Code Valet Valet

10th Two Step Unlock On Off Off

11th Chirp Delete From Tx On Off Off

To program these selectable features;

Action System Response

Turn ignition on No response

Press and release the valet switch 3 times 1 Chirp - LED 1 flash

Within 3 seconds, turn ignition Off Short chirp, then long chirp

First Then On 1 chirp = 1 second door locks

Press transmitter Lock button to change 2 chirps = 3.5 second door locks

Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock

Second Press and release the valet switch 2 chirps = auto locks off

Press transmitter Lock button to change 1 chirp = auto locks on

Third Press and release the valet switch 3 chirps = auto unlock off

Press transmitter Lock button to change 1 chirp = auto unlock dr.

Press transmitter Lock button to change 2 chirps = auto unlock all

Fourth Press and release the valet switch 2 chirps = active locks

Press transmitter Lock button to change 1 chirp = passive locks

Fifth Press and release the valet switch 2 chirps = active arming

Press transmitter Lock button to change 1 chirp = passive arming

Sixth Press and release the valet switch 2 chirps = hardwire

Press transmitter Lock button to change 1 chirp = voltage sense

Seventh Press and release the valet switch 1 chirp = siren and horn output

Press transmitter Lock button to change 2 chirps = siren output only

Press transmitter lock button to change 3 chirps = horn output only

Sixth Press and release the valet switch 2 chirps = hardwire

Press transmitter Lock button to change 1 chirp = voltage sense

Seventh Press and release the valet switch 1 chirp = siren and horn output

Press transmitter Lock button to change 2 chirps = siren output only

Press transmitter lock button to change 3 chirps = horn output only

1 2 3 4 5 6 7 8

128-6623 1
Model PRO-9642CH 1

Inhaltsverzeichnis

Seite 1 - Model PRO-9642CH

128-66231 of 8Model PRO-9642CHInstallation ManualNote : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door

Seite 2

128-66232 of 8Page 2orEight Press and release the valet switch 2 chirps = horn chirp output 16mSPress transmitter Lock button to change 3 chirps = hor

Seite 3

128-66233 of 8Page 3Valet Switch:Select a mounting location for the switch that is easily accessible to the driver of the vehicle. The switch doesnot

Seite 4

128-66234 of 8Page 4Black Wire: CHASSIS GROUNDConnect this wire to a solid, metal part of the vehicle’s chassis. Do not confuse this wire with the thi

Seite 5

128-66235 of 8Page 5Dark Blue w/Black Trace Wire: Alternate Channel 3 Output (Dbl. Push Required)This wire is controlled from the transmitter button p

Seite 6

128-66236 of 8Page 63 Wire Ground Switched Single Step Door LocksIn this application, the red wire provides a ground pulse during arming or the pulsed

Seite 7

128-66237 of 8Page 7door lock/unlock motor legs rest at ground, and switch +12 volts to the door lock/unlock motor legs for opera-tion, if this is the

Seite 8