Audiovox AS9233ST Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kfz-Elektronik Audiovox AS9233ST herunter. Audiovox AS9233ST User's Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
128-8605
1 of 20
1
SELECTABLE FEATURES
The selectable features can be set manually as explained below, or with the RF feature programmer.
To set features using the RF programmer, follow the instructions packaged with the programmer.
Factory default settings are indicated by bold text.
Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code.
Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
Also, No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no selection will be available.
RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming Guide.
RF Programmable Features Bank 2 Is Alarm Selectable Features:
Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps
1st DoorL/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L Dbl L, 1 Sec UL Dbl L, Dbl UL 1 S l/350mS ul
2nd Accy Lock Auto Lock On Auto Lock Off
3rd Accy. UL Auto UL On Auto UL Off
4th Headlights Not Available
5th Passive Locks Passive Active
6th Pass/Act Arm Passive Arm Active Arm
7th Siren/Horn Siren/Horn Siren Only Horn Only
8th Horn Chirp 10mS 16mS 30mS 40mS 50mS
9th O/R Method Custom Code Valet
10th 2 Step U/L NA
11th Chp Del Tx NA
12th Volts/HdWire N A
13th Trigger Circuits N A
14th L/UL Poll 120mS 80mS
15th Aux Channel 5 Select NA
16th Aux Channel 6 Select NA
17th Aux Channel 7 Select NA
18th Trigger Delay Instant Delayed
When using the RF programmer, enter the program mode as follows:
Turn the ignition on.
Press and release valet switch 3 times;
turn ignition off then on.
Press and hold valet switch for 5 seconds.
Siren chirps 2 times indicating access to RF feature program mode.
Model AS9233ST
Installation Manual
Seitenansicht 0
1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - 128-8605

128-86051 of 201SELECTABLE FEATURESThe selectable features can be set manually as explained below, or with the RF feature programmer.To set features u

Seite 2

128-860510 of 2010BlackWhite/BlackGrey Wire: Negative Inhibit InputThe Grey w/ Black Trace wire provides an instant shutdown for the Remote Start Con

Seite 3

128-860511 of 2011Black Wire: Chassis Ground SourceConnect the Black wire to a known vehicle ground source or to a solid clean metal part of the chas

Seite 4

128-860512 of 2012Green/Yellow Wire: Diesel Wait To Start InputThe Green/Yellow wire will connect to a diesel vehicles glow plug wire. When the unit

Seite 5

128-860513 of 2013Note!When installing this system as a stand alone passive security system, the RED wire in thisconnector must be connected to a rest

Seite 6

128-860514 of 2014output would be to disarm a factory theft deterrent system to prevent false triggering of the factory alarm whenthe remote start uni

Seite 7

128-860515 of 20153 Wire Positive Switched Door Locks:In this application, the Red wire of the door lock harness provides a + 12 volt pulse during th

Seite 8

128-860516 of 2016To Learn Tach1. Turn the ignition key to the On position.2. Press and release the valet/program push button switch 3 times.3. Immedi

Seite 9

128-860517 of 2017TESTING YOUR INSTALLATION:CAUTION!! The following procedure must be performed after the installation of an Audiovox Remote StartDev

Seite 10 - 10 of 20

128-860518 of 2018MECHANICAL NEUTRAL SAFETY SWITCH CONSIDERATIONS:Mechanical neutral safety switch configurations differ slightly in that they do not

Seite 11 - 11 of 20

128-860519 of 2019METHOD 2To connect to the key in sensor circuit as shown for method 2:A. Locate the control wire that connects the drivers door pin

Seite 12 - 12 of 20

128-86052 of 202Note: Where indicated, press transmitter lock button to change, the Factory Transmitter Lock button, Door Lock Switch, or thesupplied

Seite 13 - 13 of 20

128-860520 of 2020© 2009 Audiovox Electronics Corp., Hauppauge, N.Y. 11788 128-8605

Seite 14 - 14 of 20

128-86053 of 203To exit program mode, turn ignition off, or press and release valet switch.RF Programmable Features Bank 3 Is Remote Start Selectable

Seite 15 - 15 of 20

128-86054 of 204Action System ResponseTurn ignition on No responsePress and release the valet switch 3 times 1 Chirp - LED 1 flashWithin 3 seconds, tu

Seite 16 - 16 of 20

128-86055 of 205This Remote Start/Alarm System is designed to be used with Automatic Transmission Vehicles Only!The unit provides a selectable ignitio

Seite 17 - 17 of 20

128-86056 of 206from all areas of the vehicle. The selected location must be within 18" of the control module to allow routingand connecting of t

Seite 18 - 18 of 20

128-86057 of 207Note: This wire must be connected to the vehicle side of the starter cut relay (when used). For the electricalneutral switch configura

Seite 19 - 19 of 20

128-86058 of 208Purple Wire: (+) Door Trigger InputIf the vehicle's door courtesy light switches + 12 volts when the door is opened, (Some Fords

Seite 20 - 20 of 20

128-86059 of 209Dark Green Wire: (-) Instant Trigger InputThis is the instant on ground trigger input wire. This wire must be connected to the hood an

Kommentare zu diesen Handbüchern

Keine Kommentare