Audiovox ACC-52 Bedienungsanleitung

MODEL ACC-52REMOTE-CONTROL10-DISC CD CHANGEROWNER'S MANUALANDINSTALLATION GUIDEOPEN

10WIRING THE FM MODULEThe FM module should be positioned near your existing car stereo and the 15 foot data cable should be connected to it. Make th

CAR ANTENNA INPUTLocate your existing car radio antenna cable. This isnormally a black cable about as thick as a pencil andwill be plugged into a so

12MOUNTING THE REMOTECONTROLOn the back of the remote control you will find an adhesivebacked “Velcro” pad. Select the desired mounting area onyour c

CONTROLSLCD DisplayPlay/Pause ( / II)Power Off Switch (OFF)Disc Select ( + - )Track Select ( )Track Search ( )Track/D

USE OF CONTROLSpressing the Shuffle again, or by activating the Scan 9 orRepeat 8 functions.When the Shuffle button is pressed and held longer than 2s

This CD Changer is designed to be operated only on 12 volt DC negative ground systems. The unit can not be used on 24 voltor positive ground systems.

LOADING DISCS INTO THE MAGAZINEThis CD Changer uses a specially-designed magazine to holdup to 10 compact discs. To load discs into the magazine, gri

CD CHANGER OPERATING INSTRUCTIONSThis CD Changer is designed to operate through a compatible Audiovox car stereo which incorporates thecontrols and d

TROUBLESHOOTINGAn error made in operation or during installation of this product may be mistaken for a system malfunction. Please performthe checks d

AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this productthat should this product or any part thereof, under normal

INTRODUCTIONCongratulations on your purchase of this remote mount 10 Disc CD Changer. It allows you to easily upgradeyour existing car stereo system

© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788 Printed in China 128-6002

CD Magazine (P/N ACC-52MAZ)1 pc.Index label sheet1 pc.Owner's Manualand Installation Guide1 pc.Self-tapping screw(M5 x 12)4 pcs.Seals (A)1 pc.5 M

NoteIf the changer is to be installed in a car that is equipped with an on-board drive or navigation computer, do not disconnectthe battery cable. If

5MOUNT ON FLOOR OF TRUNK(HORIZONTAL OR 45 DEGREES)MOUNT ONSIDEWALL OFCARGO AREAMOUNT ON BULKHEAD BEHINDSEAT OF PICKUP TRUCKSMOUNT ON BACKWALLOF HATCH

PROCEDURE FOR HORIZONTAL INSTALLATIONINSTALLATIONThe unit can be installed horizontally, vertically or at a 45° angle. The position of the built-in a

Hexagonal boltwith washer base (M5 x 10)Bracket (R)Bracket (L)42Attach bracket (L) and bracket (R) to each side of theunit, using the hexagonal bolts

42Attach bracket (L) and bracket (R) to each side of theunit, using the hexagonal bolts with washer base(M5 x 10).Mount the unit in place, using four

9NOTE: When routing wires and cablesfrom the rear of the car to the dash-board, it is best to conceal the wiresunder carpeting. If you do not knowho