1Installation GuideMMD85A8.5" OVERHEAD LCDVIDEO MONITORWITH DVD PLAYERInstallation GuidePOWERSCREENSOURCESTOPPLAYEJECTON AUTOOF F5
Troubleshooting:SYMPTOM:No power at Video MonitorPower but no video orsoundPicture, but no soundREMEDY:-Verify +12 VDC on Red wire at 2 pin Power Harn
© Copyright 2005 AEC 150 Marcus Blvd. Hauppauge, NY 11788128-7461
2Installation GuideImportant NoticeAn LCD panel and/or video monitor may be installed in a motor vehicle and visible to thedriver if the LCD panel or
3Installation GuideMATERIALS INCLUDED IN THIS PACKAGE:1) MMD85A Video Monitor with DVD player (P/N 136-4052) (1 pc)2) A/V Adapter Cable (P/N112B3227)
4Installation GuideGENERAL INSTALLATION APPROACH:1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP,Tu
5Installation GuideVEHICLE PREPARATION:1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v whenkey is off). Al
6Installation GuideTRIM RING INSTALLATION:If the video monitor is to be installed with the trim ring, you may want to remove the rubber gasket first.(
7Installation GuideMOUNTING THE TRIM RINGRoofRoof SupportHeadlinerMounting Bracket(4) Self-Tapping Screws(not supplied)Trim RingVideo Unit(5) #8 Flat
8Installation Guide1) Make the connections to the vehicle for the 2 pin wiring harness.2) Connect the 2 pin harness to the mating connector on the Vid
9Installation GuideRed / black - Lamp onBlack / red - Lamp commonViolet / brown - Lamp AutoTo 3 pinconnectoron MonitorToconstant+12vdcToconstant+12vd
Kommentare zu diesen Handbüchern