Audiovox VM9413 Bedienungshandbuch PDF herunterladen (Seite 33)

VM9413

TROUBLESHOOTING

Table

Troubleshooting

Problem Cause

Corrective Action

GENERAL

Unit will not power on Radio Fuse blown Install new fuse with correct rating

Car battery fuse blown Install new fuse with correct rating

Illegal operation Press the RESET button located in the bottom right corner

the front panel

Remote control does not function Battery depleted Replace battery with new one

Battery installed incorrectly Remove battery and install correctly

No/low audio output Improper audio output connection Check wiring and correct

Volume set too low Increase volume level

Improper "MUTE" connection Review wiring diagram and check "MUTE" connection

Speakers damaged

Replace speakers

Heavily biased volume balance Adjust the channel balance to the center position

Speaker wiring is in contact with metal part

car Insulate all speaker wiring connections

Poor sound quality or distortion Pirated disc is in use Use original copy

Speaker power rating not compatible with unit Connect proper speakers

Speaker is shorted Check speaker contact

Tel-Mute malfunction "MUTE" wire is grounded Check that the "MUTE" connection is not grounded and that it's properly insulated

Unit resets itself when engine

off Incorrect connection between ACC and positive battery Check Wiring and correct

wire

TFTMONITOR

Monitor does not open automatically TFT Auto Open is turned off Turn TFT Auto Open on

No image Incorrect connection to parking brake wire Check wiring and correct

PRK SW is activated and parking brake

not engaged Stop vehicle in safe place and apply parking brake

Flashing image

interference appears on screen DVD is not compatible with current video settings Change setup to accommodate disc

Improper video signal connections Check wiring and correct

Prolonged image or improper height/width ratio dis- Improper aspect ratio setup Use correct aspect ratio setting

play

Monitor stops at incorrect position Moving path is blocked

Press OPEN key to restart monitor movement

TUNER

Weak station searching

Auto antenna is not fully extended

Connect the auto antenna control cable properly

Auto antenna not properly connected Connect the auto antenna control cable properly

HD Radio broadcast is too far away Switch to Analog tuning mode

CD/DVD

Cannot insert disc Disc already inside unit Eject current disc and insert new one

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare

Audiovox VM9413 Bedienungshandbuch Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Audiovox VM9413