Audiovox CCDF Betriebsanleitung PDF herunterladen (Seite 3)

Troubleshooting

The following troubleshooting guide takes you through some of the more common problems

associated with the installation and/or operation of a wireless system. If the problem persists,

please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com.

Issue: Cause and solution:

No sound • Check that the AC power adapter is fully inserted into the wall outlet and the power

cord from the AC adapter is ﬁ rmly connected to the speaker’s power input jack.

• If you’re using batteries for the speaker, check that they are fresh and inserted with

correct polarity (+, –). Make sure the batteries are fresh and replace if necessary.

• Conﬁ rm that the speaker is turned on.

• Check that the audio source component (stereo, MP3 player, etc.) is turned on and

transmitting sound as it normally should.

• Make sure the volume on your audio source is turned up.

• Check that the speaker volume is turned up.

• Move the Bluetooth device and the speaker closer together. The Bluetooth wireless

technology generally can operate within a range of 35 feet. However results may

vary based on other factors such as room layout, wall material, weather conditions,

etc.

• Make sure you have switched to the speaker’s Bluetooth connection when streaming

audio with Bluetooth.

• Make sure you entered the correct passkey when pairing your device.

Cannot pair

the speaker

with your

Bluetooth

device

• Make sure the Bluetooth capability of your device is turned on and discoverable.

• Move the Bluetooth device and the speaker closer together. The Bluetooth wireless

technology generally can operate within a range of 35 feet. However results may

vary based on other factors such as room layout, wall material, weather conditions,

etc.

• Make sure your device supports audio transfer.

• Turn off all other nearby Bluetooth devices or disbale their Bluetooth functionality.

• Bluetooth Reset: Press and Hold the Pair Button for 12 seconds. (Fast double beep on

reset). This resets the Bluetooth module in the speaker.

Trademark(s) ® Registered www.Acoustic-Research.com MADE IN CHINA AWSBT1 US IB 01

12 Month Limited Warranty

Speci cations

Speaker

• Bluetooth® wireless technology: Bluetooth v2.1 + A2DP proﬁ le

• 2-way acoustic design: 3” driver, 1.5” tweeter

• Audio output power: 5W (Maximum)

• Audio line-in

• Distortion : 0.5%

• S/N Ratio : 65dB (typical)

• Operation distance : Up to 10 meters (open area)

• Frequency response: 20Hz - 20kHz

• Operates using supplied AC adapter or six (6) AA batteries (not included)

*Maximum range; results may vary according to environment.

Audiovox

Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product

that should this product or any part thereof, under normal use and conditions, be proven defective in material

or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced

(at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within

the terms of this Warranty, the product along with any accessories included in the original packaging is to be

delivered with proof of warranty coverage (e.g. dated bill of sale), speciﬁ cation of defect(s), transportation

prepaid, to the Company at the address shown below. Do not return this product to the Retailer.

This Warranty is not transferable and does not cover product purchased, serviced or used outside the United

States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to

costs incurred for the installation, removal or reinstallation of the product.

The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or

been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to

moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by

leaving non-rechargeable batteries in the product while plugged into an AC outlet.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR

REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE

LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER,

INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE

OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company

any liability other than expressed herein in connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or

limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you.

This Warranty gives you speciﬁ c legal rights and you may also have other rights which vary from state/province

to state/province.

U.S.A.:Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788

CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 16, Mississauga Ontario L5T

3A5

Setting Up Bluetooth Wireless

Turning the Speaker Off

1. Press and hold the Power button on the top of the speaker to turn the speaker off.

2. Conﬁ rm that the speaker is off by verifying that the indicator light on the speaker’s front

panel is no longer illuminated.

Note: When you turn off the speaker in Bluetooth mode, you will hear 4 beeps to indicate

Bluetooth mode is turned off.

Streaming Audio With Bluetooth

Once you’ve paired and connected your device with the speaker, you can control music

playback from the palm of your hand. Select your music, stop it, change songs and playlists, all

right from your device’s screen.

To adjust volume: Press the Vol +/– buttons on top of the speaker.

To disconnect from the speaker: Either turn Bluetooth off on your device or choose

“Disconnect” from the list of options in your device’s Bluetooth settings.

To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the

speaker to ﬁ nd and connect to your device. If the speaker still hasn’t found your device (which

may happen if, for instance, another device has been connected after yours) make sure the

speaker isn’t connected to another device currently. Then select the AWSBT1 from the list of

Bluetooth connections available in your device’s Bluetooth menu to connect to it or

Fast Re-connect with press and release of the Pair button.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Regulations state that unauthorized changes or modiﬁ cations to this equipment may void the user’s authority to

operate it.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with

antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Industry Canada Regulatory Information

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this

device may not cause interference and 2) this device must accept any interference, including interference that may cause

undesired operation of the device.

This class B digital apparatus complies with Canadian ICES-003.

IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks

by Audiovox Accessories Corporation is under license. Other trademarks and trade names are those of their respective

owners.

Connecting to an Audio Source

Connecting to an MP3 player, CD player, or computer

1. Open the storage compartment on the back panel to show the

attached 3.5mm cable.

2. Connect the cable to the headphone output on your MP3 player

or CD player (or the audio output jack on your computer) and start

playback.

3. Make sure the speaker is on. Then press the

button on the top of

the speaker. The light on the front of the speaker will change to

solid green. You should hear sound coming from the speaker now.

To switch back to the speaker’s Bluetooth connection, press the

button again.

Note: You may ﬁ t your connected device, such as iPhone or iPod

touch, inside the closed compartment while the speaker is playing.

Warning: This product is designed to work with line level outputs

or headphone outputs only.

DO NOT connect it directly to speaker

outputs as it will permanently damage the speaker.

Using the Auxiliary Input

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Audiovox CCDF Betriebsanleitung Seite 3

Kommentare zu diesen Handbüchern